GM 9.25IFS stub axle discontinued

Post Reply
dmatchett
Posts: 39
Joined: Tue Mar 01, 2016 5:45 pm
First Name: Douglas
Last Name: Matchett
Other:

GM 9.25IFS stub axle discontinued

Post by dmatchett » Wed Mar 02, 2016 12:31 pm

GM and AAM have discontinued the short stub axle 26058806 (743A695F) for models GM2500/3500 pickups with a 9.25IFS
front differentials from 1999-early 2008 known as first design with the snap ring groove 12.74mm from the end of the
shaft. The second design from early 2008-2014 has the snap ring groove 16.99mm from the end of the shaft. You can
use the second design axle (743A695G) in place of the first design axle but must also change the internal nest kit 743A717.
The other option would be to purchase the later shaft 743A695G, take it with the old one to a machine shop and have them
grind the 12.74mm groove in the later one, I have customers who do that as well.
Picture1.jpg
You do not have the required permissions to view the files attached to this post.

barrycole
Posts: 1066
Joined: Thu Oct 31, 2013 2:58 pm
First Name: Barry
Last Name: Cole
Other:
Location: Toronto, Ontario ,Canada

Re: GM 9.25IFS stub axle discontinued

Post by barrycole » Sat Mar 05, 2016 5:32 pm

That's what I would do, just run it up on the lathe!
Barry Cole Toronto, Ontario, Canada. Retired after 35 years

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest