Fixed 4L65e moves f/w in reverse and all gears after rebuild

Post Reply
Tims Trans
Posts: 11
Joined: Thu Jan 03, 2019 11:57 am
First Name: Tim
Last Name: Schmidt
Other:

Fixed 4L65e moves f/w in reverse and all gears after rebuild

Post by Tims Trans » Wed Jan 23, 2019 7:22 pm

This 4l65e is out of an 03 GMC Yukon Denali it came in with burnt forward clutches and burnt band and warped reverse drum I put a less steel kit new band and a good used drum out of a 4l60e. When I put it in any gear with slight throttle it will move forward. I’m sure I mis installed something. Has any one experienced this before?
Thanks. Tim
Last edited by Tims Trans on Thu Jan 24, 2019 2:17 pm, edited 1 time in total.

Tims Trans
Posts: 11
Joined: Thu Jan 03, 2019 11:57 am
First Name: Tim
Last Name: Schmidt
Other:

Re (:fixed) 4L65e moves f/w in reverse and all gears after rebuild

Post by Tims Trans » Thu Jan 24, 2019 2:15 pm

manual valve link was dissconnected things that make you go Hmmmm
on a special note I was able to reinstall the link without removing the VB by bending the forward side of the link straight then reinstalling into the valve first then install into the linkage and rebend the link to an S shape

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests