4r75w broken gear train

Tims Trans · Post by **Tims Trans** » Thu Aug 08, 2019 4:01 pm

I rebuilt this unit on an f150 2004 for broken gear train and now it’s back again for the same thing
Any thoughts
Thanks Tim

Post by **dhritsko** » Fri Aug 09, 2019 9:31 am

make sure driveshaft yoke is not bottoming out on the output . The output is too long sometimes and it is more on trucks for some reason

Tims Trans · Post by **Tims Trans** » Sat Aug 10, 2019 11:06 pm

hmm can you cut the out put shaft down a little to fix this

Tims Trans · Post by **Tims Trans** » Sun Aug 11, 2019 12:15 am

this is a 4by4 so does it still apply to the out put shaft in the t case?

Tims Trans · Post by **Tims Trans** » Sun Aug 11, 2019 12:15 am

this is a 4by4 so does it still apply to the out put shaft in the t case?

Post by **dhritsko** » Mon Aug 12, 2019 8:35 am

been mainly 2wd , let me do some looking to see if see anything else

carod · Post by **carod** » Fri Aug 16, 2019 3:40 pm

What all is broken?

Tims Trans · Post by **Tims Trans** » Wed Aug 21, 2019 2:35 pm

well i just pulled the trans and converter and the pump stator was sheared off I was wrong on the geartrain damage, ive never seen this before. could a faulty converter cause this?

carod · Post by **carod** » Wed Dec 25, 2019 10:53 pm

Possibly a converter problem. Change the converter and complete pump assembly. Make
sure you have proper clearence when you install the converter. Check alignment, dowel pins etc.

4r75w broken gear train

4r75w broken gear train

Re: 4r75w broken gear train

Re: 4r75w broken gear train

Re: 4r75w broken gear train

Re: 4r75w broken gear train

Re: 4r75w broken gear train

Re: 4r75w broken gear train

Re: 4r75w broken gear train

Re: 4r75w broken gear train

Who is online