6R140 3-4 BIND SHIFT

Post Reply
nonletrans
Posts: 10
Joined: Wed May 09, 2018 2:07 pm
First Name: chuck
Last Name: stormer
Other:

6R140 3-4 BIND SHIFT

Post by nonletrans » Tue Jun 16, 2020 11:14 am

2011 6.7.I have 3-4 bind shift at light throttle stop & go driving and also intermittent harsh or bind 3-2-1 down shift truck works good med-heavy throttle up shifts and normal braking down shifts new to the 6r140 trying to get some opinions on this one. thanks (also no codes)

transman76
Posts: 4
Joined: Mon Aug 18, 2014 2:39 pm
First Name: Mike
Last Name: Wiles
Other:

Re: 6R140 3-4 BIND SHIFT

Post by transman76 » Sat Jul 18, 2020 11:49 am

Had those issues a few times. Was the solenoids eveytime. For some reason they stop pulsing and just become a on/off. That make the shifts all out of whack and bind and I've even chirpped the tires on down shifts with as dually tow truck from that.

You'll have to match them by the number on them. they aren't all the same if you dont know. they are coded like injectors on a Diesel. just match the code and get them and should be good. the new snap software has a spot on it where it gives you the solenoid id codes without dropping the pan.

User avatar
dhritsko
Posts: 1140
Joined: Mon Oct 28, 2013 3:43 pm
First Name: David
Last Name: Hritsko
Other:
Location: Walton Hills , OH

Re: 6R140 3-4 BIND SHIFT

Post by dhritsko » Mon Jul 20, 2020 9:32 am

can't pinpoint it but there have been some solenoid and VB issues with these units
Dave Hritsko
Transtar Industries
Technical Service Manager

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests