line presure 08 Jeep 3.8L 42RLE

Post Reply
3shads
Posts: 119
Joined: Thu Oct 31, 2013 2:56 pm
Other:

line presure 08 Jeep 3.8L 42RLE

Post by 3shads » Wed Feb 22, 2017 1:28 pm

08 jeep wrangler 3.8 42rle right hand drive :( trans fluid good ,shifts good until starting down shift limp code p1745 p0935 check wiring besy i could without pulling out , wiggle test same .the line pres. is 4.95 instead of 4.75 i said trans works good EXCEPT no o/d i'm thinking pres. related 'fix codes first

User avatar
dhritsko
Posts: 1113
Joined: Mon Oct 28, 2013 3:43 pm
First Name: David
Last Name: Hritsko
Other:
Location: Walton Hills , OH

Re: line presure

Post by dhritsko » Wed Feb 22, 2017 1:47 pm

check for any programming updates also
Dave Hritsko
Transtar Industries
Technical Service Manager

3shads
Posts: 119
Joined: Thu Oct 31, 2013 2:56 pm
Other:

Re: line presure

Post by 3shads » Thu May 04, 2017 9:21 am

finaly got back on jeep , check fo progaming updates didnt find anything to do with trans . So after all that was done to original trans an still same prob. . we completely replace trans with low milage used one ,double check wiring with tran out ,same problem p1745

User avatar
dhritsko
Posts: 1113
Joined: Mon Oct 28, 2013 3:43 pm
First Name: David
Last Name: Hritsko
Other:
Location: Walton Hills , OH

Re: line presure 08 Jeep 3.8L 42RLE

Post by dhritsko » Thu May 04, 2017 9:33 am

Code P1745. Unable to erase

VLP counters need to be reset

Had to use an OE scan tool
Dave Hritsko
Transtar Industries
Technical Service Manager

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests