AB60 E/F Coast Frictions too tight

Post Reply
Rudy210
Posts: 24
Joined: Thu May 08, 2014 1:08 pm
First Name: rudy
Last Name: rasco
Other:

AB60 E/F Coast Frictions too tight

Post by Rudy210 » Thu Aug 03, 2017 5:25 pm

Im working on a AB60. Has anyone run into the new Coast frictions (Allomatic) brand being waved ever so slightly? They stack up too tight. I tried another set of frictions still the same. Might have to go with a different brand. Thanks

Rudy210
Posts: 24
Joined: Thu May 08, 2014 1:08 pm
First Name: rudy
Last Name: rasco
Other:

Re: AB60 E/F Coast Frictions too tight

Post by Rudy210 » Wed Aug 16, 2017 2:26 pm

Well could not another set of flat frictions. So what I did was installed three frictions instead of four and four steels. When stacked the pack had good clearance. It worked so far. Hope this helps someone.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest