4l60e no rev no3rd after rebuild

Post Reply
craigrushton
Posts: 200
Joined: Mon Jan 27, 2014 2:43 pm
First Name: craig
Last Name: rushton
Other:

4l60e no rev no3rd after rebuild

Post by craigrushton » Wed Oct 05, 2016 12:16 pm

4l60e 1994 camaro came in slips under hard throttle found the forward piston cracked rebuilt it trans go kit now it will not attempt 3rd i get 1-2 shifts and nothing after that and i have no rev it will not engage at all i air checked this thing after it was assembled all air checked good and it had rev and 3rd before i rebuilt it i am thinking maybe a check ball out of place or possibly rolled the seperator plate gasket im going to pull the valve body and air check the trans again maybe a teflon ring got torn and when i tuned it broke the ring loose any in put here would be great thanks

brettsb16a2
Posts: 187
Joined: Wed Apr 29, 2015 12:39 pm
First Name: Brett
Last Name: Alex
Other:

Re: 4l60e no rev no3rd after rebuild

Post by brettsb16a2 » Thu Oct 06, 2016 8:53 am

quickest thing to do is pull the pan and inspect there first. I left a clip off of the 3-2 solenoid once but I cant remember what it did. I think it may have done the same thing.

craigrushton
Posts: 200
Joined: Mon Jan 27, 2014 2:43 pm
First Name: craig
Last Name: rushton
Other:

Re: 4l60e no rev no3rd after rebuild

Post by craigrushton » Tue Apr 09, 2019 9:32 pm

i actually did not have the snap ring on the pressure regulator all the way in the valve was still in the pump but the snap ring needed to be actually set in its groove once i did that thing worked great

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests