2005 Chrysler 300 42RLE

Post Reply
gsferraro
Posts: 682
Joined: Fri Mar 14, 2014 7:01 pm
First Name: Gary
Last Name: Ferraro
Other:

2005 Chrysler 300 42RLE

Post by gsferraro » Wed Jul 04, 2018 1:51 pm

Hello all,
Happy 4th to all. I overhauled this unit about 6 months ago, it is now back with a P1775 code, did not have this code before. What are you guys seeing out there that causes this code. Thanks Gary
So far i did new solenoid pack, range switch, and put the transgo plug kit into the switch valve. Also, while road testing the car on the highway the code returns. I have another valvebody installed and will be driving the car tomorrow morning. Ant input would be great. Thanks

brettsb16a2
Posts: 187
Joined: Wed Apr 29, 2015 12:39 pm
First Name: Brett
Last Name: Alex
Other:

Re: 2005 Chrysler 300 42RLE

Post by brettsb16a2 » Thu Jul 05, 2018 10:54 am

Looks like a wore out bore on the SSValve. Vac test would be great in this situation. I have replaced many Chrysler ecu's but never for this code. Replace the VB if you can't bore it and oversize the valve.

gsferraro
Posts: 682
Joined: Fri Mar 14, 2014 7:01 pm
First Name: Gary
Last Name: Ferraro
Other:

Re: 2005 Chrysler 300 42RLE

Post by gsferraro » Wed Jul 11, 2018 10:11 am

Hello all,
Update on this car, Looks like another valvebody did the trick. Funny thing the valvebody was the first thing that came to mind but the last thing i did. A few months after overhaul it came back with the code, so i figured it was something that i installed during the overhaul since it didn't have this code before. Thanks for the reply...........................It's a fix. Gary

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest