08 mustang

Post Reply
3shads
Posts: 126
Joined: Thu Oct 31, 2013 2:56 pm
Other:

08 mustang

Post by 3shads » Mon Aug 05, 2019 9:45 am

5r55s takes rev moves about car lenght then turns loose go back to netu. back to rev takes it turns loose again .cant find anything wrong . had this problem before but can't remeber what i did to fix . any help?

User avatar
dhritsko
Posts: 1132
Joined: Mon Oct 28, 2013 3:43 pm
First Name: David
Last Name: Hritsko
Other:
Location: Walton Hills , OH

Re: 08 mustang

Post by dhritsko » Mon Aug 05, 2019 11:34 am

MLPS ? if everything airchecks and no other issues maybe the MLPS
Dave Hritsko
Transtar Industries
Technical Service Manager

3shads
Posts: 126
Joined: Thu Oct 31, 2013 2:56 pm
Other:

Re: 08 mustang

Post by 3shads » Tue Aug 06, 2019 11:16 am

not mlps changed it

User avatar
dhritsko
Posts: 1132
Joined: Mon Oct 28, 2013 3:43 pm
First Name: David
Last Name: Hritsko
Other:
Location: Walton Hills , OH

Re: 08 mustang

Post by dhritsko » Wed Aug 07, 2019 2:21 pm

The SOLENOID REGULATOR VALVE is a notorious sticker.
The first 55W i built had this issue.
after a reverse engage, i would give it throttle and it would bang out of gear. i went crazy for several days and finally after studying the hydraulic, realized it had to be sol reg.
The problem is.. when a builder pulls the VB and picks all the valves, it is ALWAYS free. It binds up IN THE TRANS after it gets hot and VB swells taking away clearance.

i redesigned that valve and voila! problem gone.
this was the first part we made when doing R&D.
Jim immediately noticed that shifts became more consistent and what he thought was "adapting"
shift control was actually sticking valve.

With this valve installed the shifting gets amazingly consistent, from dead cold to very hot.

Before we released the kit we would watch time and again guys throwing sol bodies and valve bodies at them to correct these complaints, but for the guys using the kit, those are days gone by.
from Dean Mason
Dave Hritsko
Transtar Industries
Technical Service Manager

3shads
Posts: 126
Joined: Thu Oct 31, 2013 2:56 pm
Other:

Re: 08 mustang

Post by 3shads » Wed Aug 07, 2019 3:19 pm

what kit ? got part number Thanks for help:)

User avatar
dhritsko
Posts: 1132
Joined: Mon Oct 28, 2013 3:43 pm
First Name: David
Last Name: Hritsko
Other:
Location: Walton Hills , OH

Re: 08 mustang

Post by dhritsko » Wed Aug 07, 2019 3:49 pm

S46165 VB KIT, 5R55W/S/N, 99-UP
SUPERIOR I have used them , I like them myself . I don't do units very much anymore but on this unit I use this kit
Dave Hritsko
Transtar Industries
Technical Service Manager

3shads
Posts: 126
Joined: Thu Oct 31, 2013 2:56 pm
Other:

Re: 08 mustang

Post by 3shads » Wed Aug 07, 2019 4:17 pm

didnt install k5r55wsn , but did t16165a it's not as bad but still hav problem now u never know when it's gona do it not every time . gona drive again n morning c how it works out . i'll b back .

User avatar
dhritsko
Posts: 1132
Joined: Mon Oct 28, 2013 3:43 pm
First Name: David
Last Name: Hritsko
Other:
Location: Walton Hills , OH

Re: 08 mustang

Post by dhritsko » Wed Aug 07, 2019 5:00 pm

good luck , let me know
Dave Hritsko
Transtar Industries
Technical Service Manager

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests