4r75w broken gear train

Post Reply
Tims Trans
Posts: 20
Joined: Thu Jan 03, 2019 11:57 am
First Name: Tim
Last Name: Schmidt
Other:

4r75w broken gear train

Post by Tims Trans » Thu Aug 08, 2019 4:01 pm

I rebuilt this unit on an f150 2004 for broken gear train and now it’s back again for the same thing
Any thoughts
Thanks Tim

User avatar
dhritsko
Posts: 1140
Joined: Mon Oct 28, 2013 3:43 pm
First Name: David
Last Name: Hritsko
Other:
Location: Walton Hills , OH

Re: 4r75w broken gear train

Post by dhritsko » Fri Aug 09, 2019 9:31 am

make sure driveshaft yoke is not bottoming out on the output . The output is too long sometimes and it is more on trucks for some reason
Dave Hritsko
Transtar Industries
Technical Service Manager

Tims Trans
Posts: 20
Joined: Thu Jan 03, 2019 11:57 am
First Name: Tim
Last Name: Schmidt
Other:

Re: 4r75w broken gear train

Post by Tims Trans » Sat Aug 10, 2019 11:06 pm

hmm can you cut the out put shaft down a little to fix this

Tims Trans
Posts: 20
Joined: Thu Jan 03, 2019 11:57 am
First Name: Tim
Last Name: Schmidt
Other:

Re: 4r75w broken gear train

Post by Tims Trans » Sun Aug 11, 2019 12:15 am

this is a 4by4 so does it still apply to the out put shaft in the t case?

Tims Trans
Posts: 20
Joined: Thu Jan 03, 2019 11:57 am
First Name: Tim
Last Name: Schmidt
Other:

Re: 4r75w broken gear train

Post by Tims Trans » Sun Aug 11, 2019 12:15 am

this is a 4by4 so does it still apply to the out put shaft in the t case?

User avatar
dhritsko
Posts: 1140
Joined: Mon Oct 28, 2013 3:43 pm
First Name: David
Last Name: Hritsko
Other:
Location: Walton Hills , OH

Re: 4r75w broken gear train

Post by dhritsko » Mon Aug 12, 2019 8:35 am

been mainly 2wd , let me do some looking to see if see anything else
Dave Hritsko
Transtar Industries
Technical Service Manager

carod
Posts: 182
Joined: Wed Aug 10, 2016 6:53 pm
First Name: Rod
Last Name: Roy
Other:
Location: Calgary, Alberta

Re: 4r75w broken gear train

Post by carod » Fri Aug 16, 2019 3:40 pm

What all is broken?

Tims Trans
Posts: 20
Joined: Thu Jan 03, 2019 11:57 am
First Name: Tim
Last Name: Schmidt
Other:

Re: 4r75w broken gear train

Post by Tims Trans » Wed Aug 21, 2019 2:35 pm

well i just pulled the trans and converter and the pump stator was sheared off I was wrong on the geartrain damage, ive never seen this before. could a faulty converter cause this?

carod
Posts: 182
Joined: Wed Aug 10, 2016 6:53 pm
First Name: Rod
Last Name: Roy
Other:
Location: Calgary, Alberta

Re: 4r75w broken gear train

Post by carod » Wed Dec 25, 2019 10:53 pm

Possibly a converter problem. Change the converter and complete pump assembly. Make
sure you have proper clearence when you install the converter. Check alignment, dowel pins etc.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest