4F27E 2012 Ford transit connect

Post Reply
pae4704
Posts: 10
Joined: Thu Oct 31, 2013 3:07 pm
Other:

4F27E 2012 Ford transit connect

Post by pae4704 » Thu Sep 12, 2019 6:36 pm

vehicle has 62,000 miles come in it would not go into 4th and at times neutral in all forward gears it had p0732 p0734 p0766 codes all the solenoids were in spec on resistance . I pulled trans and found direct drum and band burnt cutches and steels looked good . Rebuilt unit with pistons clutches reman torque converter .installed superior shift kit and replaced band and adjustment bolt for band . The servo pin bore felt good . Got it back together and it shifts good at 55 mph and under but when you get on interstate it will not shift in to 4th without letting off accelerator .There are no dtc's kind of stumped i'm retired first one I've done in a few years does any one have any ideas thanks cletus

User avatar
dhritsko
Posts: 1134
Joined: Mon Oct 28, 2013 3:43 pm
First Name: David
Last Name: Hritsko
Other:
Location: Walton Hills , OH

Re: 4F27E 2012 Ford transit connect

Post by dhritsko » Fri Sep 13, 2019 8:31 am

check the MAF sensor , make sure it is clean and working . Maybe try unplugging it and drive it .
Dave Hritsko
Transtar Industries
Technical Service Manager

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest