RE0F11A no OSS reading at the computer

Post Reply
Posts: 1
Joined: Tue Jun 12, 2018 8:57 pm
First Name: Walter
Last Name: Shafer

RE0F11A no OSS reading at the computer

Post by Wallyjs2 » Mon Dec 09, 2019 3:38 pm

I'm working on a 2013 Nissan Altima and am having a output speed sensor issue. The data on my scanner is showing the RPM reading from the sensor but it is not being translated into MPH (vehicle speed RPM- 448, MPH-0). The speedometer works and no codes present or pending. The estimated speed, likely from the ABS seems accurate and it will shift, it is just erratic, sometimes harsh, and not getting all the speeds. I have tried another speed sensor, checked the wiring and have voltage coming from the computer to all 3 speed sensors. I am thinking that it is in the computer but have no way to say for sure. Any input on this would be appreciated. This is driving me crazy

Posts: 15
Joined: Thu Feb 06, 2020 11:12 am
First Name: J
Last Name: E

Re: RE0F11A no OSS reading at the computer

Post by smftnt » Wed May 06, 2020 7:03 pm

i just read that some of those speed sensors have 1 or 2 washers between the sensor and case used as as a shim, and some use no washers. Usually will cause speed sensor codes though etc. Good luck

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests